Jkprostickers
Ford F-150 Center Hood Decals Vinyl Stripes & Graphics (2015-2020)
Choose options
13th Gen Ford F-150 Center Hood Stripe Decals & Vinyl Graphics
The Ford F150 hood stripe decal is engineered for 13th gen (2015-2020) Ford F-150 trucks and installs directly on the hood panel for a clean, centered visual upgrade. This black center stripe graphic creates a bold hood accent that runs longitudinally across the factory hood surface, delivering a sharp, performance oriented appearance once installed. Designed for direct purchase and immediate installation, this hood applied vinyl graphic aligns precisely with the hood panel geometry found across compatible trims, producing a focused visual result without extending onto doors, cab panels, or bed sides.
Vehicle Compatibility
Designed to fit 13th gen (2015-2020) Ford F-150 models, including:
- XL, STX, XLT, Lariat, Tremor, King Ranch and Platinum
This decal is vehicle specific and intended exclusively for the Ford F-150 hood panel within the listed year range.
Installation
Designed specifically for hood application. Graphics position along the hood surface, allowing controlled placement during installation.
Material & Durability
Produced using high contrast vinyl engineered to maintain sharp edges and bold visibility on the bed side. Built for exterior truck use while preserving detail, rated for up to 5-7 years under regular driving conditions.
FAQ
Is this Ford F150 hood stripe decal made for my truck’s hood panel?
Yes. This decal is intended for the hood panel of 13th gen (2015-2020) Ford F-150 models and is not designed for doors, cab sides, or generic placement.
Will this black hood decal fit all listed F-150 trims?
It is compatible with XL, STX, XLT, Lariat, Tremor, King Ranch, and Platinum trims within the specified year range.
Does the center stripe graphic extend onto other panels?
No. The design is intended to remain visually centered on the hood and does not wrap onto adjacent body panels.
Is this considered an aftermarket hood stripe for the F-150 2015-2020?
Yes. It is an aftermarket hood stripe designed specifically for the 2015-2020 Ford F-150 hood application.
Can this vinyl hood accent be installed immediately after purchase?
Yes. The product is prepared for direct installation upon delivery and does not require additional components before application.
Buy now and make your f 150 look unique.
🚚 Free Shipping
All products ship absolutely free, with no hidden fees or purchase minimums. This is just one of the ways we help you save. We use USPS and UPS courier for fast and reliable deliveries to the United States and Canada
Precision Fit: Our decals, stripes, and graphic kits are engineered for an exact fit and superior finish. Each design is tailored to its intended placement, ensuring the visual flow follows factory body lines correctly. We sell only what we personally install so fitment is proven, not assumed.
Exclusive Designs: We create and offer original decal designs available only through us. Every vinyl graphics kit is custom cut per order, ensuring freshness, accuracy, and no mass stocked inventory.
Continuously Evolving: Our product lineup is constantly refined and expanded. If you don’t see a design that matches your vision, contact us custom solutions are always welcome.
Installer Friendly: While professional installation is recommended for complex kits, all of our products are designed with the installer in mind, making application as straightforward and stress free as possible.
At dealership parts departments, graphics kits often cost between $600-$900, come in limited color options, and offer no customization. We deliver factory quality premium vinyl graphics at highly competitive prices giving you full control to personalize your decals with your choice of colors or color combinations from our extensive selection.
Vinyl Decal Installation Guide (Wet Method)
Our decals are precision cut for an exact fit. For best results, we recommend
the wet installation method, which allows easy positioning
and bubble free application.
Tools Required
- Spray bottle (water)
- Plastic squeegee (felt edge recommended)
- Masking tape
- Microfiber towel
- Isopropyl alcohol (70% or higher)
- Sharp blade or utility knife
Step 1: Surface Preparation
Wash the application area thoroughly with soap and water. Dry completely.
Clean the surface using isopropyl alcohol to remove wax, grease, or residue.
The surface must be clean, smooth, and cool to the touch.
Step 2: Test Fit & Positioning
Without removing the backing paper, place the decal on the vehicle to check
alignment. Use masking tape to hold it in position and create reference points.
Step 3: Prepare the Wet Solution
Fill a spray bottle with clean water.
Step 4: Apply the Decal
Peel the backing paper off the decal slowly. Lightly spray the adhesive side
of the decal and the vehicle surface. Place the decal onto the vehicle; it
will slide for easy adjustment.
Step 5: Alignment & Squeegee
Adjust the decal into its final position. Starting from the center, squeegee
outward using firm, even strokes to remove all water and air bubbles.
Step 6: Remove Transfer Tape
Allow the decal to set for 10–15 minutes. Slowly peel the transfer tape back
at a sharp angle (180°). If vinyl lifts, press it back down and squeegee again.
Step 7: Final Trimming
If the decal crosses door seams, panel gaps, or edges, carefully trim using
a sharp blade. Press edges firmly to ensure proper adhesion.
Step 8: Curing Time
Do not wash the vehicle for 24-48 hours. Avoid pressure washing, extreme heat,
or high speed driving during the curing period.
Important Installation Tips
- Ideal installation temperature: 15°C-30°C (60°F-85°F)
- Avoid installation in direct sunlight or on hot panels
- Take your time proper alignment ensures the best finish
🔒 Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.